fbpx

PRODUCTS

Learn more about the different products that we offer

Pet Odor Remover – Cleans Carpets, Upholstery, & Area Rugs

This product is designed to remedy, minor, fresh pet urine odors in carpets and rugs between professional cleanings.

  • Pet Odor Remover is effective when used on fresh urine deposits.
  • Urine deposits allowed to dry can possibly cause bleaching, and make stain and odor removal difficult.

Mixing Instructions: Dilution: Ready-to-use product 

  1. Remove as much urine as possible from the affected area by vacuum extraction or blotting with a towel or other absorbent material.
  2. Soak area with the Pet Odor Remover product and remove extra product with vacuum extraction or by blotting with an absorbent cloth.
  3. Repeat the application of Pet Odor Remover and again extract the excess with vacuum extraction or by blotting with an absorbent cloth.
  4. Cover area with a clean white towel and allow area to remain damp for approximately 24 hours.
  5. Do not walk on damp carpets with soiled shoes.

Spot Remover 5 oz – Stain Removal Carpets, Upholstery, & Area Rugs

Professional Strength Spot Remover is a carbonated cleaning product packaged in attractive aerosol cans for use between regular, professional carpet cleaning jobs.

Mixing Instructions: Only use Professional Strength Spot Remover on colorfast carpets that can be cleaned with water.

  • Align the trigger with the black dot at the top of the can.
  • Tear off and discard the safety tab.
  • Point the can and trigger towards the stained or soiled area, squeeze the trigger, and thoroughly dampen the area.
  • Allow about 30 seconds for the solution to penetrate the stain and lift it to the surface for removal.
  • Using a soft, white, terry cloth towel, gently work the product into the carpeting and extract, using a blotting action.
  • Repeat procedure, if necessary.

Spot Remover (Aerosol) 18 oz

    • Professional Strength Spot Remover is a carbonated cleaning product packaged in attractive aerosol cans for use between regular, professional carpet cleaning jobs.
    • The product is ozone friendly.
    • It contains no CFC’s. Professional Strength Spot Remover is sold exclusively to Chem-Dry® franchises and is not sold in retail stores.
    • This gives you a product that your customers can only get from you.
    • Professional, Strength Spot Remover is 33% stronger than the regular Spot Remover.
  • The can is also 25% larger than the regular Stain Extinguisher™ can.

Mixing Instructions: Only use Professional Strength Spot Remover on colorfast carpets that can be cleaned with water. 

  1. Align the trigger with the black dot at the top of the can. 
  2. Tear off and discard the safety tab. 
  3. Point the can and trigger towards the stained or soiled area, squeeze the trigger, and thoroughly dampen the area.
  4. Allow about 30 seconds for the solution to penetrate the stain and lift it to the surface for removal.
  5. Using a soft, white, terry cloth towel, gently work the product into the carpeting and extract, using a blotting action. 
  6. Repeat procedure, if necessary.

Grease & Oil Remover (18 oz)

  • The solvent-based spotter, Grease & Oil Remover, is great for oil based spots such as grease, oil, lipstick, and adhesives.
  • It comes in a convenient aerosol can and the fine mist provided from the can helps the user avoid over-application which could result in delamination.
  • It is safe in the hands of the customer and a great up-selling opportunity. Grease & Oil Remover
  • 100% evaporative and residue free.

Mixing Instructions:

1. Test carpet for colorfastness in an inconspicuous area.  
2. Turn the can upside down and actuate the spray trigger. Lightly mist the product on the fibers that have been affected. Over application may result in delamination.  
3. Agitate with a bone scraper or other blunt object.  
4. Blot the area with a soft, white, absorbent cloth.  
5. Repeat if necessary.  
6. Place a towel over the area and stand on it with your full body weight to absorb excess amounts of the Grease & Oil Remover.

Spot Remover Custom (16 oz)

  • The solvent-based spotter, Grease & Oil Remover, is great for oil based spots such as grease, oil, lipstick, and adhesives.
  • It comes in a convenient aerosol can and the fine mist provided from the can helps the user avoid over-application which could result in delamination.
  • It is safe in the hands of the customer and a great up-selling opportunity. Grease & Oil Remover
  • 100% evaporative and residue free.

Mixing Instructions:

1. Test carpet for colorfastness in an inconspicuous area.  
2. Turn the can upside down and actuate the spray trigger. Lightly mist the product on the fibers that have been affected. Over application may result in delamination.  
3. Agitate with a bone scraper or other blunt object.  
4. Blot the area with a soft, white, absorbent cloth.  
5. Repeat if necessary.  
6. Place a towel over the area and stand on it with your full body weight to absorb excess amounts of the Grease & Oil Remover.

Dust Mite (Aerosol)

      • Chem-Dry Dust Mite Anti-Allergen Aerosol contains powerful active ingredients that deactivate the allergen, Der p1, found in dust-mite droppings by denaturing and substantially reducing the IgE antibody binding capacity of the allergen.
      • As a result, the allergen is no longer recognized by the body’s immune system and does not bond with antibodies sent to destroy it.

Mixing Instructions – Always use goggles

    1. Clean surface to be treated with Dust Mite Anti-Allergen Aerosol by vacuuming, laundering, or preferably, Hot Carbonating Extraction.
    2. After testing an inconspicuous area for colorfastness, apply a wetting mist of Dust Mite Anti-Allergen Aerosol by spraying directly to the surface of what you are treating, leaving a damp, but not saturated, surface.
    3. Application will provide benefits for 60-90 days. After that time period it should be re-applied.

Leather Care Kit

    •  

For leather types A & P. Kit contains Mild Cleaner and Leather Protector with cloth and sponge. Not for Nubuck leather.

Apple Cinnamon Deodorizer

  •  

These new deodorizers will make powders, stick-ups, and air fresheners obsolete because of their convenience, anti-soiling properties, strong malodor counteractant, and wonderful scents.

Mixing Instructions:

Shake well before using.

  1. Turn the can upside down and hold 18’from the carpet.
  2. Spray carpet in a back and forth motion. DO NOT SPRAY INTO THE AIR as you would an oldfashioned air freshener. Note: Do not walk on damp carpets with soiled shoes as dirt transfer may occur. Do not use after expiration date.

Spruce Deodorizer

 

Chem-Dry Carpet Deodorizers are revolutionary, new aerosol rug and room deodorizers from Harris Research, Inc. These new deodorizers will make powders, stick-ups, and air fresheners obsolete because of their convenience, anti-soiling properties, strong malodor counteractant, and wonderful scents.

Renew Cleaner Concentrate

Renew Cleaner Concentrate is a neutral cleaner designed for use on all tile and stone surfaces. It is ideal for everyday, routine maintenance and chemically-sensitive surfaces. Renew Cleaner Concentrate is safe to use on surfaces that have a coating or a sealer. Because of the neutral pH, Renew Cleaner Concentrate can be used by consumers without the risk of damaging the protection of the sealer that has been applied after a professional cleaning.

Mixing Instructions. Dilution: 2 ounces per gallon of hot water 

1. Pre-test in an inconspicuous area for surface compatibility.
2. Apply to soiled area.
3. Wipe surface clean with a sponge or other absorbent material.

Hardwood Floor Cleaner

Hard Floor Cleaner is a ready to use product that can be sold to consumers. Hard Floor Cleaner effectively cleans vinyl, linoleum, and finished wood floors. Its extraordinary ability to dissolve grease and dirt with no rinsing leaves floors looking their best.

Mixing Instructions. Ready-to-use product To install can in Razor: 
1. Insert aerosol can into Razor cradle 
2. Turn aerosol can until nozzle seats into place. 
3. Press aerosol can down to lock into cradle. 
4. Pull trigger back to spray. (See the back of aerosol can for specific instructions.)

Ensure Clean/Seal

Ensure Clean & Seal is designed to clean and protect porous tile, stone, and grout. It is safe to use on all porous natural stone, man-made tile, and grout and comes in two ready-to-use forms: 1. Ensure Clean & Seal Spray ‘ Spray the surface and wipe it clean with a sponge or other absorbent material. 2. Ensure Clean & Seal Wipes ‘ Wipe the surface clean and then throw the used wipe away. Both forms include a sealant that will deposit a protective sealer on porous surfaces as they clean.

Mixing Instructions. Dilution: Ready-to-use product. Application (Spray):

1. Spray product on soiled surface.
2. Wipe clean using a sponge or other absorbent material.

Application (Wipes):
1. Remove a wipe
2. Wipe soiled surface with fresh wipe.
3. Discard wipe when finished. DO NOT FLUSH.

Radiance Polish

This stone polish spray is designed for use on highly polished natural stone surfaces. It leaves natural stone with a shine and helps to hide some minor etches and abrasions on the surface. Radiance is effective at maintaining the shine on highly polished natural stone countertops and other surfaces. This product is NOT for use on floor surfaces because it may present an increased slipping hazard. This product is not designed to remove or correct major etches and abrasion permanently although it may hide them temporarily.

Mixing Instructions: Ready-to-use Application
1. Ensure the surface is clean and dry.
2. Apply a light coating of product to the surface.
3. Wipe or buff any excess product until a shine appears. Note: NOT for use on floors.

Renew Clean & Seal For Razor

Renew Clean & Seal is designed exclusively for use with The Razor. Renew Clean & Seal is an aerosol product that you conveniently dispense on a surface as you sweep. Clean & Seal has a neutral pH and is safe for previously sealed surfaces and all tile and stone types. Renew Clean & Seal works best on marble, granite, limestone, travertine, slate, terrazzo, and sandstone. It is also effective on man-made tile and grout.

Mixing Instructions:  Ready-to-use Application
1. Insert aerosol container into The Razor.
2. Place a clean pad on The Razor.
3. Spray product as necessary.
4. Wipe up product with The Razor.

Microfiber Pad

Microfiber pads that velcro on to the Razor. Quick and easy way to apply High Gloss Finish or Green VCT Finish or Wood Floor Polish. Smooth even application of finish. Use with Microfiber Applicator Mop.

Razor